NUD4700 LED Shunts

onsemi NUD4700 LED Shunts are designed to be used with 1W LEDs (nominally 350mA @ 3V). These shunts provide a current bypass in the case of a single LED going into an open circuit. The NUD4700 LED shunts automatically reset themselves if the LED is replaced or the shunt is healed. These shunts feature a typical ON-state voltage of 1V and an OFF-state current of less than 250µA. The NUD4700 LED shunts are AEC-Q101 qualified and PPAP capable. These shunts are Pb and halogen/BFR-free and are RoHS compliant. Typical applications include LEDs where preventive maintenance is non-practical, LED headlights, LEDs with high reliability requirements, and crowbar protection for open-circuit conditions.

Resultados: 2
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (CRC) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Serie
Tensión de disparo
Voltaje activado
Voltaje en estado desactivado nominal repetitivo VDRM
Paquete / Cubierta
Empaquetado
onsemi LED de Dispositivos de protección LED Shunt
Hoja de datos
2 030En existencias
Min.: 1
Mult.: 1
Carrete: 3 000

NUD4700 5.5 V 1.2 V 10 V POWERMITE-2 Reel, Cut Tape
onsemi LED de Dispositivos de protección SCR Shunt
Hoja de datos
50 086En existencias
MouseReel Disponible
Min.: 1
Mult.: 1
Carrete: 3 000

NUD4700 7.5 V 1.2 V 10 V PowerMITE-2 Reel, Cut Tape, MouseReel