Todos los resultados (1 864)

Filtros

Opciones de disponibilidad
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (CRC) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
SparkFun Accesorios SparkFun This is the same 18650 Lithium Ion Cell that you know and love but now includes pre-attached solder tabs! These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargab
Mouser actualmente no vende este producto en su región.
SparkFun Accesorios SparkFun Snappable Protoboard Protoboard 35En existencias
₡7 156,40
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Enclosure-Aluminum 120x94.5x34mm 15En existencias
₡4 751,85
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Lithium Ion Battery - 400mAh
Mouser actualmente no vende este producto en su región.
Más información disponible
SparkFun Accesorios SparkFun Lithium Ion Battery - 2Ah
Mouser actualmente no vende este producto en su región.
Hoja de datos
SparkFun Accesorios SparkFun Teensy Header Kit 53En existencias
₡1 171,05
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Jumper Wires Premium 4 in M/M-26 AWG 30P 38En existencias
₡1 457,30
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun ESP32 Thing Stackable Header Set
Hoja de datos
233En existencias
₡1 301,16
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Large Jumper Wire Kit - 700pcs 12En existencias
₡21 635,75
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a super small 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.
Hoja de datos
103En existencias
₡1 061,75
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device com
Hoja de datos
790En existencias
₡390,35
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fully compatible w
Hoja de datos
149En existencias
200Se espera el 16/11/2026
₡957,66
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more
Hoja de datos
287En existencias
540Se espera el 7/12/2026
₡1 014,91
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector. 6En existencias
₡2 201,57
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Servo - Generic (Sub-Micro Size)
Hoja de datos
2En existencias
₡6 740,03
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach
Hoja de datos
23En existencias
₡10 669,54
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply
Hoja de datos
18En existencias
₡6 604,71
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Thermocouple Type-K Glass Braid Insulate 3En existencias
₡10 018,96
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st
Hoja de datos
77En existencias
₡6 740,03
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Load Cell - 200kg, S-Type (TAS501)
Hoja de datos
6En existencias
₡55 169,33
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is
Hoja de datos
95En existencias
₡2 628,35
Min.: 1
Mult.: 1


SparkFun Accesorios SparkFun The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout which includes the MAX30101 a highly sensitive optical sensor that succeeds the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photodiode t
Hoja de datos
26En existencias
51Se espera el 11/12/2026
₡18 991,78
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Always always always wear eye protection while soldering. This is a golden rule we all know but sometimes overlook. Luckily with these SparkFun Safety Glasses you'll have a pair of lightweight economical and stylish lenses to protect your precio 7En existencias
₡2 654,37
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long. 19En existencias
₡1 951,75
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a solderer's best helper the third hand. Comes with a heavy base two alligator clips a soldering iron holder and a good magnifying glass. Note that we don't normally need a third hand. It's nice but soldering flat on a table works just f 15En existencias
₡8 301,42
Min.: 1
Mult.: 1