Computadoras de placa simple Don t let the size fool you the BBC micro:bit v2 is the perfect device for you to get creative with digital technology! At half the size of a credit card this board is the ultimate tool for learning to code and building unique creations from int
DEV-17287
SparkFun
1:
₡10 737,20
8 En existencias
N.º de artículo de Mouser
474-DEV-17287
SparkFun
Computadoras de placa simple Don t let the size fool you the BBC micro:bit v2 is the perfect device for you to get creative with digital technology! At half the size of a credit card this board is the ultimate tool for learning to code and building unique creations from int
8 En existencias
Comprar
Min.: 1
Mult.: 1
Antenas The TOP106 from TOPGNSS is a certified GNSS/GPS surveying antenna capable of receiving the L1/L2 bands for GPS GLONASS Galileo and BeiDou constellations. These 'UFO' antennas have incredible performance for the money. The antenna has a built in gr
+2 imágenes
GPS-17751
SparkFun
1:
₡104 067,06
2 En existencias
N.º de artículo de Mouser
474-GPS-17751
SparkFun
Antenas The TOP106 from TOPGNSS is a certified GNSS/GPS surveying antenna capable of receiving the L1/L2 bands for GPS GLONASS Galileo and BeiDou constellations. These 'UFO' antennas have incredible performance for the money. The antenna has a built in gr
2 En existencias
Comprar
Min.: 1
Mult.: 1
Herramientas de desarrollo del sensor de presión This is a force sensitive resistor with a square 1.75x1.5" sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is bein
SEN-09376
SparkFun
1:
₡9 592,18
7 En existencias
N.º de artículo de Mouser
474-SEN-09376
SparkFun
Herramientas de desarrollo del sensor de presión This is a force sensitive resistor with a square 1.75x1.5" sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is bein
7 En existencias
Comprar
Min.: 1
Mult.: 1
Detalles
Sensores de fuerza y células de carga This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower
SEN-09674
SparkFun
1:
₡17 591,73
8 En existencias
N.º de artículo de Mouser
474-SEN-09674
SparkFun
Sensores de fuerza y células de carga This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower
8 En existencias
Comprar
Min.: 1
Mult.: 1
Detalles
Destornilladores, llaves de tuercas y llaves de cubo This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
TOL-09146
SparkFun
1:
₡853,56
29 En existencias
N.º de artículo de Mouser
474-TOL-09146
SparkFun
Destornilladores, llaves de tuercas y llaves de cubo This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
29 En existencias
Comprar
Min.: 1
Mult.: 1
Detalles
Accesorios para antenas Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly
+1 imagen
GPS-17519
SparkFun
1:
₡4 049,22
34 En existencias
N.º de artículo de Mouser
474-GPS-17519
SparkFun
Accesorios para antenas Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly
34 En existencias
Comprar
Min.: 1
Mult.: 1
Sensores de corriente – Industriales Measuring high-voltage AC current doesn't have to mean splicing into live dangerous wires. This non-invasive current sensor also known as a split-core current transformer or current clamp lets you measure exactly how much current is passing throug
SEN-11005
SparkFun
1:
₡7 780,96
3 En existencias
N.º de artículo de Mouser
474-SEN-11005
SparkFun
Sensores de corriente – Industriales Measuring high-voltage AC current doesn't have to mean splicing into live dangerous wires. This non-invasive current sensor also known as a split-core current transformer or current clamp lets you measure exactly how much current is passing throug
3 En existencias
Comprar
Min.: 1
Mult.: 1
Herramientas de desarrollo RF Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky the Swarm M138 Satellite Transceiver allows you to send and receive short messages. It works anywhere in the world including the po
SPX-20107
SparkFun
1:
₡9 769,14
3 En existencias
N.º de artículo de Mouser
474-SPX-20107
SparkFun
Herramientas de desarrollo RF Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky the Swarm M138 Satellite Transceiver allows you to send and receive short messages. It works anywhere in the world including the po
3 En existencias
Comprar
Min.: 1
Mult.: 1
Accesorios Raspberry Pi This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
PRT-13054
SparkFun
1:
₡546,49
40 En existencias
N.º de artículo de Mouser
474-PRT-13054
SparkFun
Accesorios Raspberry Pi This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
40 En existencias
Comprar
Min.: 1
Mult.: 1
Detalles
Alojamientos de cables y cabecera This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.
PRT-27908
SparkFun
1:
₡156,14
90 En existencias
Nuevo producto
N.º de artículo de Mouser
474-PRT-27908
Nuevo producto
SparkFun
Alojamientos de cables y cabecera This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.
90 En existencias
Comprar
Min.: 1
Mult.: 1
Detalles
Etiquetas y Transpondedores NFC/RFID This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
SEN-10127
SparkFun
1:
₡2 003,79
27 En existencias
N.º de artículo de Mouser
474-SEN-10127
SparkFun
Etiquetas y Transpondedores NFC/RFID This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
27 En existencias
Comprar
Min.: 1
Mult.: 1
Etiquetas y Transpondedores NFC/RFID This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
SEN-10128
SparkFun
1:
₡2 003,79
108 En existencias
N.º de artículo de Mouser
474-SEN-10128
SparkFun
Etiquetas y Transpondedores NFC/RFID This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
108 En existencias
Comprar
Min.: 1
Mult.: 1
Sensores de fuerza y células de carga This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
SEN-11207
SparkFun
1:
₡15 744,08
4 En existencias
N.º de artículo de Mouser
474-SEN-11207
SparkFun
Sensores de fuerza y células de carga This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
4 En existencias
Comprar
Min.: 1
Mult.: 1
Destornilladores, llaves de tuercas y llaves de cubo What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
TOL-12891
SparkFun
1:
₡2 862,56
5 En existencias
N.º de artículo de Mouser
474-TOL-12891
SparkFun
Destornilladores, llaves de tuercas y llaves de cubo What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
5 En existencias
Comprar
Min.: 1
Mult.: 1
Capacitores cerámicos de capas múltiples (MLCC) - Emplomados This is a basic 1000pF 100V 5% tolerance PTH ceramic capacitor.
COM-30151
SparkFun
1:
₡208,19
96 En existencias
Nuevo producto
N.º de artículo de Mouser
474-COM-30151
Nuevo producto
SparkFun
Capacitores cerámicos de capas múltiples (MLCC) - Emplomados This is a basic 1000pF 100V 5% tolerance PTH ceramic capacitor.
96 En existencias
Comprar
Min.: 1
Mult.: 1
Detalles
Ventiladores tangenciales CC The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
PRT-17368
SparkFun
1:
₡3 580,80
6 En existencias
N.º de artículo de Mouser
474-PRT-17368
SparkFun
Ventiladores tangenciales CC The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
6 En existencias
Comprar
Min.: 1
Mult.: 1
Accesorios para antenas This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
PRT-17546
SparkFun
1:
₡3 383,03
89 En existencias
N.º de artículo de Mouser
474-PRT-17546
SparkFun
Accesorios para antenas This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
89 En existencias
Comprar
Min.: 1
Mult.: 1
Kits de robótica educativa This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
ROB-12629
SparkFun
1:
₡7 260,49
28 En existencias
N.º de artículo de Mouser
474-ROB-12629
SparkFun
Kits de robótica educativa This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
28 En existencias
Comprar
Min.: 1
Mult.: 1
Sensores de movimiento y posición montados en placa This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
SEN-09197
SparkFun
1:
₡6 490,20
1 En existencias
7 En pedido
N.º de artículo de Mouser
474-SEN-09197
SparkFun
Sensores de movimiento y posición montados en placa This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
1 En existencias
7 En pedido
Ver fechas
Existencias:
1 Se puede enviar inmediatamente
En pedido:
3 Pendiente
4 Se espera el 29/10/2026
Plazo de entrega de fábrica:
3 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Herramientas de desarrollo del sensor de presión Force Sensitive Resistor - Small
SEN-09673
SparkFun
1:
₡5 980,15
100 En existencias
N.º de artículo de Mouser
474-SEN-09673
SparkFun
Herramientas de desarrollo del sensor de presión Force Sensitive Resistor - Small
100 En existencias
Comprar
Min.: 1
Mult.: 1
Detalles
Sensores de calidad del aire The MQ-9B is a CO and CH gas-detection sensor from Winsen. The sensing material of the MQ-9B is SnO2 which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by cycling between high and low temperatures. The sensor s conduct
SEN-17050
SparkFun
1:
₡3 383,03
10 En existencias
N.º de artículo de Mouser
474-SEN-17050
SparkFun
Sensores de calidad del aire The MQ-9B is a CO and CH gas-detection sensor from Winsen. The sensing material of the MQ-9B is SnO2 which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by cycling between high and low temperatures. The sensor s conduct
10 En existencias
Comprar
Min.: 1
Mult.: 1
Temporizadores y productos de apoyo This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam
COM-16473
SparkFun
1:
₡556,90
196 En existencias
360 Se espera el 21/10/2026
N.º de artículo de Mouser
474-COM-16473
SparkFun
Temporizadores y productos de apoyo This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam
196 En existencias
360 Se espera el 21/10/2026
Comprar
Min.: 1
Mult.: 1
Soldadura Soldadura wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Desoldering braid or desoldering wick is a pre-fluxed copper braid that is used
TOL-29531
SparkFun
1:
₡5 699,10
1 En existencias
Nuevo producto
N.º de artículo de Mouser
474-TOL-29531
Nuevo producto
SparkFun
Soldadura Soldadura wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Desoldering braid or desoldering wick is a pre-fluxed copper braid that is used
1 En existencias
Comprar
Min.: 1
Mult.: 1
Detalles
Herramientas de desarrollo Bluetooth - 802.15.1 If you are looking for a board that can truly handle your next Internet of Things project look no further. The SparkFun Artemis Thing Plus combines the powerful Artemis module with our popular Thing Plus footprint. It packs 1MB flash 384k RAM an
WRL-15574
SparkFun
1:
₡13 506,08
19 En existencias
N.º de artículo de Mouser
474-WRL-15574
SparkFun
Herramientas de desarrollo Bluetooth - 802.15.1 If you are looking for a board that can truly handle your next Internet of Things project look no further. The SparkFun Artemis Thing Plus combines the powerful Artemis module with our popular Thing Plus footprint. It packs 1MB flash 384k RAM an
19 En existencias
Comprar
Min.: 1
Mult.: 1
Módulos multiprotocolo The ESP32-WROOM-32E is a powerful generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding music streaming and MP3 decoding. At the core
WRL-17830
SparkFun
1:
₡2 118,29
4 En existencias
N.º de artículo de Mouser
474-WRL-17830
SparkFun
Módulos multiprotocolo The ESP32-WROOM-32E is a powerful generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding music streaming and MP3 decoding. At the core
4 En existencias
Comprar
Min.: 1
Mult.: 1