Mostrar más 
Resultados: 108
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (CRC) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
Adafruit Accesorios de Adafruit Large Dual Row Wire Housing Pack for DIY Jumper Cables 5En existencias
Min.: 1
Mult.: 1
Adafruit Accesorios de Adafruit Premium Silicone Covered Extension Jumper Wires - 200mm x 40 52En existencias
Min.: 1
Mult.: 1

Adafruit Accesorios de Adafruit Male/Male Jumper Wires - 40 x 3 27En existencias
50Se espera el 11/9/2026
Min.: 1
Mult.: 1
Adafruit Accesorios de Adafruit Female/Female Jumper Wires - 40 x 12" 59En existencias
Min.: 1
Mult.: 1
Adafruit Accesorios de Adafruit Female/Female Jumper Wires - 40 x 3" 95En existencias
Min.: 1
Mult.: 1
Adafruit Accesorios de Adafruit Female/Male Ext Jumper Wires 40x3 9En existencias
25Se espera el 3/11/2026
Min.: 1
Mult.: 1

Seeed Studio Accesorios de Seeed Studio 1 pin dual-female jumper wire 100mm 50pcs pack 33En existencias
Min.: 1
Mult.: 1

Seeed Studio Accesorios de Seeed Studio 2 pin dual-female jumper wire - 300mm (10 PCS pack) N/A
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can b
Hoja de datos
509En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic ca 473En existencias
258Se espera el 19/8/2026
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Jumper Wires Premium 6"" F/F Pack of 10 2En existencias
10Se espera el 20/8/2026
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to fem 8En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header. Comes in five packs of t 4En existencias
5Se espera el 17/8/2026
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens 2En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j 11En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty 5En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
Hoja de datos
793En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthD
Hoja de datos
104En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
Hoja de datos
8En existencias
110En pedido
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
Hoja de datos
106En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
Hoja de datos
120En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
Hoja de datos
44En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
Hoja de datos
67En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
Hoja de datos
176En existencias
270Se espera el 10/8/2026
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
Hoja de datos
68En existencias
Min.: 1
Mult.: 1